However, David, who works in Excel's office, really left a bad taste in our mouth for the whole project. We didn't love the color our house ended up being - a color match that Excel performed for us - and expressed as such. David was a nightmare to work with once we mentioned we had a problem. He had terribe customer service skills and repeatedly made us feel like it was our fault and that we were stupid. Painting our house was a big commitment and investment in our eyes, and he was not the least bit helpful in trying to get us to an end product we would be happy with. In fact, he succeeded in making us even more unhappy to the point that we gave up on even having Excel repaint to get us to a color we'd be happy with. A very disappointing experience.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
I turn away any job when the client refuses to pay anything up front. It sends a red flag. I also charge a scheduling fee which is non-refundable. I get 33 percent when I show up and begin work. Another percentage halfway through, and the balance upon completion after client is satisfied. There needs to be skin in the game for both parties as a measure of good faith. If you are dealing with a reputable company (did your due diligence, right?) why wouldn't you want to pay something as work progresses? We do this not only because we love to paint but we require cash flow to stay in business. There is not always 'money in the bank' as you suggest. It's tough these days. The suggestion buy 'Kim' 'Never pay a contractor a deposit' is nonsensical.

A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective. 

"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
Home Works Painting is licensed (Virginia Class A #2705-153298) and insured (Workman’s Comp and General Liability), and has been servicing Northern Virginia since 2005. We pride ourselves on delivering a first class job with exceptional service. Home Works Painting has been selected as Northern Virginia’s Best Pick for painters for the past seven years, and is a member of Painting and Decorating Contractors of America (PDCA).
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.

Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.


Comment: Freshening up a well kept home for sale: paint stairwell and one bathroom, paint and possibly repair exterior front door surround, paint front door, remove, paint and replace palladian window on second floor (easy to access), paint baseboards and woodwork where needed, possibly paint (same color) small kitchen walls, paint inside and out of sun room windows, as needed.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.

When we checked out their work the next day we found multiple, I mean MULTIPLE, paint splatters all over the place.  On the hardwood floors (had to be at least 10 paint splatters on the ground), paint on the fireplace, clumps of paint on the wall.  There were several areas that needed a paint touch up that weren't.  It seemed like the whole job was done by a kid. We called them and asked if they could come back and basically finish their job.  We told them we will mark all the paint splatters and areas missed with blue paint tape, so when they came back they would know exactly where to look.  We marked probably about 20 areas that needed attention.  Sounds flawless right?


To begin, move everything out of the room. Every painter we spoke with had a horror story about the time he didn't follow Rule No. 1. Bigger pieces of furniture can sometimes be left covered in the center of larger rooms, but if you are repairing drywall, says Chris Span, of Span's Quality Painting in Mobile, Alabama, "Take everything out. Drywall dust goes everywhere." Remove doors, light fixtures and hardware, and label everything with masking tape. Also, invest in drop cloths. "It's surprising how well a few drops of paint can cover a floor," says Rich Maceyunas, of Maceyunas Painting and Wallpaper in Waterbury, Connecticut. Buy high-quality drop cloths, such as canvas or paper-backed plastic. (Paint soaks right through lightweight fabrics and bedsheets.) Plastic sheeting works, but it's very slippery and doesn't absorb drips.
David was great. Super communicative and responsive about the schedule and what was happening. I was also having a few windows installed and they were super great about adjusting their effort to work around the window people. And Josh and Garcia - I can't say enough about those guys. Josh walked around with me on the first day, going over what was happening and making sure I understood the scope of work. Anytime anything came up, he chatted with me about to make sure I was in the loop. The job site was always tidy and the place was really clean when they left. They were both friendly, courteous, and professional. And I think my four month old puppy would have been happy to go home with Josh. That ungrateful little monkey! (The puppy, not Josh).
Paint will be your next-biggest cost, at anywhere from $20 to $70 or more per gallon, depending on the sheen, the grade you’ve chosen and any special features. Some paints, for instance, are mold resistant. Others suppress smells or require fewer coats. Some have a lifetime warranty. Paints with warranties, however, may not be worth a higher price. In Consumer Reports tests approximating nine years of wear, only a few exterior paints and stains with lifetime warranties held up well. But “you’ll grow tired of the color long before a good-quality paint wears out,” Bancroft says.
There are cases where apartment complexes allow you to choose from a color wheel of neutral hues before you move in. Some charge a fee for calling in a painter to do the walls, while others offer new paint as a benefit of moving in. If you're not a fan of neutral colors, consider looking for an apartment that allows you to paint the walls a more expressive tone. Otherwise you can invest in boldly colored furniture and posters.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.

"I hired Medina to complete a restoration and paint job for the outside of my house. They were very fair in their pricing and did an excellent job. My GC was skeptical that they could do a good job considering the scope of work and the price given. Mr Medina completed wood replacements, facia restoration and complete outside paint job on time and within budget. He suggested additional restoration during the project and his recommendations were on point and didn’t add much to the cost. I couldn’t be happier and my GC asked for his business card after inspection. Will use again when I can complete the concrete work. Thank You *****"
Load flat or eggshell exterior paint color into paint sprayer. Depending on intensity of hue, apply one or two coats of flat or eggshell exterior paint to entire house. Be sure to work your way from top to bottom in a smooth, controlled manner, overlapping each stroke by 8 inches. TIP: When changing exterior color from light to dark or dark to light, start with a coat of primer to ensure proper coverage. Primer is not necessary when a fresh coat of existing color is being applied.
Enforcement of this Act by the Painter-Stainers Company was sought up until the early 19th century, with master painters gathering irregularly to decide the fees that a journeyman could charge, and also instigating an early version of a job centre in 1769, advertising in the London newspapers a "house of call" system to advertise for journeymen and also for journeymen to advertise for work. The guild's power in setting the fee a journeyman could charge was eventually overturned by law in 1827, and the period after this saw the guild's power diminish, along with that of the other guilds; the guilds were superseded by trade unions, with the Operative United Painters' Union forming sometime around 1831.[2]
If you're going to do any part of the painting or prep work on your own, you must know that the first step in preparing a surface is washing it. Since dirt can affect the smoothness of a surface area -- and therefore paint's adhesion to it -- use soap to remove any dirt or stains. Make sure there's no soap left on the walls when you're finished; also make sure to remove any gloss with sandpaper and vacuum up the leftover dust.
Research the licensing requirements for your area. These laws governing professional contractor work will be different depending on where you live. It’s important to be aware of these laws and what they mean from the outset. Contact the licensing board for your state or district to find out more about what you’ll need to do to get your business off the ground.

Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.


Farrow & Ball has a small paint color palette, but their colors are so rich and beautiful that you're bound to find the perfect one for your small home. Farrow & Ball's Pavilion Gray is a rich greige that works well for a dining room that's decorated in either a contemporary or traditional style. Pair this gorgeous wall color with a modern crystal chandelier for a stylish juxtaposition in a traditional dining room.

My wife and I just painted the interior of our house with about 6-8 gallons, of $30+ per gallon (meaning the good stuff, non-diluted) with absolutely fantastic results. However we just paid an average of $5 per gallon. Reason...all big box stores have paint, set aside, that has been mixed but not picked up by the customer. They need to sell it quick and if you're not in a hurry (you know well in advance that a room or two need painting and it's not like the roof leaking and needs an immediate fix) you can go to each store when you need other supplies or food, like Walmart (when convenient, driving 20 miles to each is not worth it) and over the course of a month or two, pick out some very nice colors of quality paint. We found perfect colors...not saying they were our first choice but when we opened the can, very nice and some even better than our original picks. Cost to paint the entire house was about $100, with all materials included, period. We had it on the market for a few months to sell, didn't sell, painted the rooms, got 2 offers the day after we finished, took the best one and never looked back.

Home Painter Company

×