Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.

Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.
I've seen this done many years ago by a guy who did all sorts of jobs where I lived. My dad caught him painting his boss's roof and he was watering down the paint. We've had a hard time trying to get a painter for our house. We've had a guy that had been remmended by a neighbor and he hasn't showed up to paint for 2 weeks. I want to call him and my husband says no. I'm 69 years old and I'm about ready to go and paint our 2 porches, I've painted all my life and all the inside of our home. Maybe that's the way it should be with everyone that can paint pretty good.
When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."

This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.

We had an absolutely amazing experience getting the interior of our house painted by Color World. Tom was quick to give us his time for a quote and go over all questions we had. Shell was informative …and very accurate on helping us choose our colors. They couldn’t have sent a better crew of painters led by Shaun Childers. They have completely changed our lives and made our home something we are proud to show off and come home to. Highly Recommend! Flawless from start to finish! 😁 more »

Professional painters provide estimates primarily based on the square footage of your home. Painting an average home between 500 and 1,500 square feet can cost between $1,000 and $3,000. However, factors such as number of stories and ease of access can also affect the overall price. Homeowners report that the average cost to paint a house nationally is $2,581 and most pay between $1,714 and $3,682.
"Bear Creek Painting did a great job on my house trim. I was having new gutters put on my house but realized that the trim needed to be scraped and painted. Nick was able to get his crew out within a few days. Their work was excellent, timely and Nick was professional and responsive to my need to get the work done quickly. I would definitely use Bear Creek painting for my next painting project."
If you’re a construction or renovation worker who specializes in painting, you might have given some thought to how you can go into business for yourself. Painting contractors not only need to be skilled in a variety of painting techniques, but also know how to bid on jobs, calculate project expenses and hire workers in order to be successful. Before you can begin working as an independent painting contractor in most states, you’ll first need to apply for licensing, carry liability insurance and file the right documents to have your business officially recognized.

To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.

The best time to tackle windows is in the beginning of the day, when you're fresh," says Doherty. "But it still takes me an hour to do a standard window." For double-hungs, begin by raising the inner sash and lowering the outer sash until their positions are almost reversed. Paint the lower half of the outer sash first, then the entire inner sash. Once the lower sash is dry, return both to their normal position, but leave them slightly open. Finish painting the outer sash. "Windows take too long to tape," says Doherty. When painting, overlap the glass by 1/16 inch to seal the wood.


If you talk with a painting contractor long enough, you’ll inevitably hear; “There’s no good help out there.” It’s easy to hide behind this excuse, but it’s not true. There are plenty of reliable painters out there, business owners just don’t take the time to find them. It takes TIME to find good people, time you wouldn’t have if you were busy painting.
When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."
Estimate: Short and sweet, but HIGHLY accurate. We wanted to use our own paint as there was a particular no VOC kind I wanted to use, and this was never an issue for them. They knew exactly how much we needed for the job based on the specs from the website of the company we were ordering it from, so we could order it without issue. The estimate was right inline with two other companies we received quotes from.
I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
The last big decision is how to apply the paint. Most pros use paint sprayers because they're fast, but in inexperienced hands a high-powered sprayer can leave drips, thin coats, and a mist that may land on many things other than your siding. If you do hire a painter who uses a sprayer, make sure he is meticulous about removing, covering, or masking off everything in the area that might get hit with overspray: gutters, roofs, windows, shrubbery, walkways, cars—you name it.
Ryan, David  and Erin were so  helpful during the entire process. The team was easy to work with, detail oriented and efficient. Because of this the entire project went smoothly, from the in person consultation, scheduling and throughout painting process. Hector and his crew did a wonderful job. They came in on time, asked questions when they needed to, polite, hardworking and most importantly excellent at their jobs.
I've used Excel for the exterior paint job on my last two homes, and they've done a great job each time. Working with the team is easy and seamless throughout the entire process. Both homes looked fantastic when their crew was done. When the paint on our cement stairs started chipping the following winter (smooth cement stairs in a high traffic area), Excel was quick to respond and they re-painted the stairs that spring, with a textured grit, for no charge. Almost a year later and no chipping and the stairs are much safer now. They really stand by their work, which is why we continue to use them.
We hired Excel painting for the entire interior of our home, and had an awesome experience from start to finish.  Welmer and his team were highly skilled, experienced, fast, efficient and super pro.  Everything happened to spec, on time and budget.  They did a fantastic job and our house looks beautiful.  I'm going to miss them being in our house next week :)  Highest recommendation.
Every home has details that can be accentuated for amazing looking visual appeal and first impressions.  The key is to not make the wrong details stand out.  Entryways, windows, shutters and other details on the home can be painted to make their design noticeable.  However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results.
Buying a can of premium paint, then bait and switch over to low-line products? Again, complete nonsense. Think about it for a moment; the Painter needs 5 gallons of wall finish. So, he buys one can of premium and the rest 'cheap'? How is he going to hide the 4 other gallons? What's he going to hide it in??? He only has ONE gallon of premium. It's not as though he's going to keep older can labels, they would be covered in paint of a different colour.
Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.

For your convenience MDE publishes this list of accredited lead contractors that meet Maryland’s standards to perform abatement activities involving lead-based paint. The list is an information resource only. MDE does not endorse any of the contractors included on this list nor does MDE provide any warranty about their performance. Consumers are advised to request bids and conduct reference checks before hiring. Contact the individual contractors for information regarding services and fees. Verify with the contractor you are going to hire that the supervisor is accredited by MDE and all lead paint abatement workers have current training. This accreditation and training does not satisfy the EPA Renovation, Repair and Painting (RRP) Rule.

basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
If you’re a construction or renovation worker who specializes in painting, you might have given some thought to how you can go into business for yourself. Painting contractors not only need to be skilled in a variety of painting techniques, but also know how to bid on jobs, calculate project expenses and hire workers in order to be successful. Before you can begin working as an independent painting contractor in most states, you’ll first need to apply for licensing, carry liability insurance and file the right documents to have your business officially recognized.
Most of us can do an okay job of painting a room. But a seasoned professional does a great job. Obviously, pros have more experience than the average homeowner, but they also know techniques and tricks that make them better painters. We asked six pro painters to share those secrets. They probably kept a few tips to themselves, but they provided us with more than enough to help you work more efficiently and get better results. Some of what you'll read may surprise you. For instance, their secrets won't cut painting time. Painters spend two to four days on an average-size room. That's how long it takes to prep, prime and paint correctly. It's more work, but when you stand back to admire the results, you'll agree it's time well spent.
If you’re a construction or renovation worker who specializes in painting, you might have given some thought to how you can go into business for yourself. Painting contractors not only need to be skilled in a variety of painting techniques, but also know how to bid on jobs, calculate project expenses and hire workers in order to be successful. Before you can begin working as an independent painting contractor in most states, you’ll first need to apply for licensing, carry liability insurance and file the right documents to have your business officially recognized.
×