Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.

Complete the EPA’s Renovation, Repair and Painting (RRP) program. As of 2010, all painting contractors in the United States must be officially certified to work with lead-based paints. The purpose of the RRP program is to inform new contractors about the risks and proper safety procedures for working on properties that contain hazardous materials.[2]
Referred by a neighbor, I got an estimate from Excel along with two other companies to paint the exterior of our home; their estimate was the cheapest by at least a grand compared to the other companies. They contacted me a couple of weeks earlier than expected and offered to do the power washing a week or so earlier due to an opening in their schedule, another opening got them to our house 2 weeks earlier than planned to paint!!!
Sean and TJ painted the entire interior of our townhouse and were a pleasure to work with. Excellent job of prepping and cleaning up at the end of each day. We changed our minds on the color selection of our downstairs walls TWICE, but they didn't make us feel like idiots (even though we felt that way) and were patient with the process. Bryan, the owner, is detail oriented and very easy to work with. We would definitely recommend them!!!

Work with a professional painting contractor. If you haven’t done so already, sign on to work with a painting company near you. As part of a professional team, you’ll learn the tricks of the trade and work in a variety of different environments, both commercial and residential. There’s no better way to accumulate practical experience than to do it on the job.[8]


The state of Florida does not have specific licensing requirements for contractors who solely provide painting services. Contractors who construct or demolish any part of the home for compensation are required to have a general contractor's license, however. In addition, painters who work in homes built before 1978 or buildings occupied by children are required to obtain a lead paint certification in Florida. This is to ensure proper handling and disposal of lead-based paint.

Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.
Vivax Pro House Painters set the standard for house painting contractors in Denver, Colorado Springs, Northern Colorado and Grand Junction by utilizing the best service, Sherwin Williams paint and materials and house painters with the utmost integrity. Vivax Pros is a trusted painter and home improvement contractor because unlike many Denver house painters, our customers satisfaction is so important that we accept no payment or deposits until you and a Vivax Pro house painter have inspected the job. We do what we promise because and hope to paint for your friends, family, coworkers and neighbors!
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
We were performing some remodeling in conjunction with the painting project and Henry's crew was able to work with and around our contractor with ease.  Henry's crew was ahead of schedule, so they were able to start our project early (nearly a week ahead of schedule) and ended up finishing the project the day they were originally scheduled to start!  
Even an old lamp with a bare bulb held close to a wall will make minor cracks, bumps or nail pops jump out. Carmen Toto, owner of C. Toto & Sons in Madison, New Jersey, uses painter's putty or a lightweight spackle for minor cracks and dents; he uses plaster of Paris for dents deeper than 1/8 inch. Instead of the standard tape-and-spackle method for bridging over recurring stress cracks, Maceyunas uses a rubberized spray-on primer called Good-Bye Crack. Damaged wood requires a slightly different approach. "Don't use spackle on wood," says Toto, "because it just won't stick." For damaged trim, he uses painter's putty or a two-part wood filler, such as Minwax's High Performance Filler. Smooth any repairs, bumps, and nibs with a drywall pole sander. For smoother walls and better adhesion, some of our pros sand all previously painted walls regardless of the shape they're in.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.

Professional painters provide estimates primarily based on the square footage of your home. Painting an average home between 500 and 1,500 square feet can cost between $1,000 and $3,000. However, factors such as number of stories and ease of access can also affect the overall price. Homeowners report that the average cost to paint a house nationally is $2,581 and most pay between $1,714 and $3,682.

Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
My friend already posted about this, but the incident is so outrageous it deserves two postings. On a lovely Sunday afternoon, we were out on a  walk and waiting, patiently, on 65th and 1st for the east-west traffic to stop and allow us to cross. When the eastbound traffic was clear, a car heading west stopped to let us cross. Behind this law-abiding driver, heading west, was the Excel Home Painting van. The Excel driver immediately started honking at the car in front of him--you know, the one that stopped to allow pedestrians to cross--and then screaming and cursing at us, including calling us "f**king bitches and whores." Why? Because we were crossing the street. Really?
In 1894, a national association formed, recreating itself in 1918 as the National Federation of Master Painters and Decorators of England and Wales, then changing its name once again to the British Decorators Association before merging, in 2002, with the Painting & Decorating Federation to form the Painting & Decorating Association. The Construction Industry Joint Council, a body formed of both unions and business organizations, today has responsibility for the setting of pay levels.[2]
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.

Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!

I used this company back in around 2006-8, three different projects, interior work.  Very professional, quality work and very clean.  Never disappointed.  What really stood out was the professionalism of this company, especially Ryan.  Several years after the work was done, I needed to paint a large spot on my wall that was previously painted by Ryan's company.  I couldn't find the paint color that was used.  I contacted Ryan for the information, within less than an hour he sent me via email the exact paint used and it's color formula.  Again, Ryan is the ultimate professional and provides the best customer service I've ever experienced.  I used to do construction with my father as a teenager, I know quality work and I know and see when details are addressed in this companies workmanship.  I hIghly recommend this company without any hesitation!
The inland suburbs to the west, such as Orange Park and Fleming Island, are known for their reasonable housing prices. The more rural setting means that the homes in this area are very similar to homes in suburbs across the country rather than the large beach houses seen in Jacksonville’s seaside towns. Homes here have reasonable square footage, which can bring the cost of painting services down.
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush."
When you choose Five Star Painting residential house painting contractors, you can feel confident that you are hiring the best in the business. Local Five Star painters have been serving clients throughout the United States and Canada since 2004. From taking time to prepare the area to using exactly the right equipment for each job, we make sure the project is done correctly. Our experience shows: We’re good at what we do, and our clients are always happy with the work we leave behind!
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
For over 40 years, the Alan’s House Painting team has provided commercial and residential customers with exceptional customer service—combined with high-quality craftsmanship in and around Davis California. Whether you need commercial or residential painting done; big or small, we work hard to provide exceptional painting services. Our team of talented professional painters know your house is more than just a house—it’s your home. We respect your time and your space during the entire project and work hard to earn your trust. Find us on Angie’s List or call Alan’s House Painting at (530) 756-8188 today for a free quote.
"Bear Creek Painting did a great job on my house trim. I was having new gutters put on my house but realized that the trim needed to be scraped and painted. Nick was able to get his crew out within a few days. Their work was excellent, timely and Nick was professional and responsive to my need to get the work done quickly. I would definitely use Bear Creek painting for my next painting project."
We got 4 quotes from various businesses.  Excel Home Painting came in middle of the road and we picked them because of their professional approach - and we are now very happy with the outcome!  Great job from start to finish  - on time; friendly staff and offered suggestions.   We had the exterior of our house painted and just got in before the weather turned nasty!
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
After painting the ceiling, work from the top down: Start with the crown molding, then do the walls and then paint the casement molding around the windows and doors. Do baseboard molding last. "Painting the baseboards last keeps dust and grit from traveling off the floor, onto the brush and then up onto the freshly painted casements," explains Weeks.
Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.
We are committed to bringing you a beautiful Color World quality paint job or other service that is clean, on time, and on budget. Our experienced professionals often complete gutter installation at the same time as exterior painting, repainting the area behind the old gutters before installing the new ones. We provide the services you need to maintain several areas of your exterior and interior, going above and beyond what other companies in our industry have to offer.
Remember: You want to get the highest quality paint your budget will allow to ensure its lasting beauty. You'll also need painting supplies like primer, brushes, rollers and painter's tape. A professional will have these items on-hand. According to statistics, paint and other supplies account for about 15 percent of a professional painter's total cost; labor will factor into 85 percent of their charges.
I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.
However, David, who works in Excel's office, really left a bad taste in our mouth for the whole project. We didn't love the color our house ended up being - a color match that Excel performed for us - and expressed as such. David was a nightmare to work with once we mentioned we had a problem. He had terribe customer service skills and repeatedly made us feel like it was our fault and that we were stupid. Painting our house was a big commitment and investment in our eyes, and he was not the least bit helpful in trying to get us to an end product we would be happy with. In fact, he succeeded in making us even more unhappy to the point that we gave up on even having Excel repaint to get us to a color we'd be happy with. A very disappointing experience.
we only use the best interior paint which goes further as far as pricing a repaint we charge 2.00 a square foot floor space for walls ceilings and trim .on new construction using the best paint 3.90 per foot floor space that is with 3 coats on all surfaces but as being a professional for 45 years i recommend use a professional so that your paint will last longer and you wont have to pay to have it done more often i do free consulting in these areas i am more than happy to assist you with your projects 864-506-6666 just always remember good paint last longer and use a washable paint your home is your most valueable investment take care of it

To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
Even after collecting bids and comparing initial impressions of different home painters in Atlanta, you may be unsure who to hire, or even how to evaluate whether they do good work or not. That's understandable in a city where Bobby Petrino didn't even finish out one football season at the helm of the Atlanta Falcons! When it comes to Atlanta home painters and their work, the key to evaluating quality is focusing on the details. Determining whether past paint jobs have held up over time, for example, is a good indication of whether the Atlanta house painter you're checking up on put in the proper amount of prep necessary for the job. Also, don't be afraid to ask to see a sample of the painter's work in person. Almost any paint job looks good from the street or in a well-shot photograph. The question is whether a house painter in Atlanta's work looks equally impressive once you get up close and personal.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap. 

Paint Contractor Company

×