Another factor to consider is the height and features of your home. An example would be a house completely trimmed in Cement Fiber, which does chalk if you do not purchase the correct paint and apply enough of it. Some houses in Coastal Areas are already on 15+ft Stilts (off ground) and then another 20ft high at times. This requires rental equipment and careful cost estimation based on the difficulty of the overall project, The best advice that I can give is to get several estimates in your area and make a decision a couple of weeks afterwards. You will "weed out" per se the individuals that do not have the patience to finish a project that was started-as well as those who haggle you for payment (sometimes daily) before project is completed. I have heard some wild stories from a lot of Homeowners. Common sense and your intuition will make you aware of anyone that you should not hire.
Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.
WOW! I think the guy I hired read this first and I have photos that would make your skin crawl. Bottom line: he got me for $1900.00. Every single thing he painted had to be completely redone....that's when I discovered he did NOT use the colors I picked, he actually used leftover exterior paint from his mother's house! Because I have pets he said things needed to be sealed first and I did agree to that. What I did NOT agree to was using some kind of foul smelling gray stuff ON MY HARDWOOD FLOORS! THEN he painted them BLACK, telling me that all they were good for was covering over with laminate or carpet. He also dripped and tracked paint all over my ceramic tile floors. PLUS left a wet used paint roller in my garden window and had stuff piled in front so I didn't find it until it had dried. I have no idea how much that is going to cost to repair. Then he left without finishing (thank God) but left the "leftover" paint, uncovered, in the rain. Again, hid it so I didn't immediately find it. Obviously we will be going to court but I doubt if I see a penny from him.
There are numerous factors to consider prior to pricing that can add additional costs to the painting of your home. It was previously stated that the surface material, condition of existing surface, home features, special materials that may need to be utilized, and any additional prep work that might be required can effect the final cost. The location also effect the overall condition of the home or business moving from the Northwoods , lake areas to urban homes.

Located at the northern part of the state, Jacksonville is right along the Atlantic Ocean. In addition to year-round residents, many homeowners have homes in the area that they rent out to vacationers and tourists. This is especially true in suburbs, such as Neptune Beach, Sawgrass, and Atlantic Beach, that are located right along the water. Keeping rental properties in good condition and ensuring they have fresh paint guarantees that they are attractive to potential visitors. Using bright, beachy colors and quality paints that can stand up to the salty air can increase the overall cost of painting services in the area.
When we checked out their work the next day we found multiple, I mean MULTIPLE, paint splatters all over the place.  On the hardwood floors (had to be at least 10 paint splatters on the ground), paint on the fireplace, clumps of paint on the wall.  There were several areas that needed a paint touch up that weren't.  It seemed like the whole job was done by a kid. We called them and asked if they could come back and basically finish their job.  We told them we will mark all the paint splatters and areas missed with blue paint tape, so when they came back they would know exactly where to look.  We marked probably about 20 areas that needed attention.  Sounds flawless right?
Imagine waking in a living space that looks clean with colors that perfectly fit your aesthetic. At WOW 1 DAY PAINTING, we want to make this dream a reality, which is why we provide several different house painting services for you and your family. Whether you need interior house painting or exterior house painting when you work with us, you're getting the quality you expect in a timeline that's unexpected! Our friendly, uniformed crew has experience painting virtually anything you can think of, and we can't wait to help you!
Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.
As any painter will tell you, prep work is just as important -- if not more important -- than the paint application itself. If the paint on your house is chipping or peeling, it needs to be scraped and sanded smooth before applying a new finish. In most cases, you won’t need to remove all the existing paint, but scraping, sanding, patching, caulking, and priming are critical steps that take place before the start of most exterior painting jobs.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
"Bear Creek Painting did a great job on my house trim. I was having new gutters put on my house but realized that the trim needed to be scraped and painted. Nick was able to get his crew out within a few days. Their work was excellent, timely and Nick was professional and responsive to my need to get the work done quickly. I would definitely use Bear Creek painting for my next painting project."
Thanks, all, for your time & efforts adding to the article & comments, especially Dave urging requesting both General Liability AND Worker Compensation insurance certificates to protect from real & fraudulent liability--from my experience especially in California, where insurance fraud is a popular income thief, even causing car collisions to collect.
Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.

As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
×