Some contractors work on time and material others on a firm contract. I would never hire the former and am leary of the latter. A contractor may low-ball a bid to get the job planning to make a killing on change orders. If you say good morning to them, they charge you extra for that. If the contract is not very, very specific and extensively fleshed out or if they display their change order schedule prominently on top, show them the door.
Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.
Riverside and San Marco are neighborhoods on the southern side of Jacksonville. These are some of the older neighborhoods, with many homes dating back to the early 1900s. Painting services in this area cost slightly more because of the older architecture and the larger sizes of the homes. There are newer homes in the Southside neighborhood, which has seen tremendous growth since the 1990s.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Paint gets more expensive as you go from flat to gloss. The difference is usually around $1 per gallon per sheen upgrade. Flat is the cheapest, then matte flat or eggshell, satin, semigloss then gloss. Paint also gets much more expensive the darker it gets. A white or neutral paint color can be as much as $20 less expensive than a deep base red or blue.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
Accent walls offer a clever way to add color to a small space. You can choose a color from your overriding color scheme or choose any color that you love. The secret to using an accent wall in a small room is to keep the accent color close to your main wall color without a big contrast. This will make your room look larger and make your accent wall blend in.
When you go to the home improvement store, find out how much 12 gallons of the paint you want would cost, and that will help you determine your cost. Maybe it's a low-quality paint that costs $30, in which case you're looking at about $360 for paint. If you choose high-quality paint that costs around $70, your total paint cost could be closer to $840. Professionals also recommend that you add an extra 10 or 20 percent to your total square footage, depending on the type of siding you have. Some textures require extra paint because they're rough. This is especially true with wood and stucco siding.
Payment. Every client is different. Every job has it's own unique set of circumstances. I always start off the discussion with my clients saying that I'm flexible on how they would like to proceed with payments but that I prefer half down. I refuse to change order. Change orders are my last resort. Instead I ask questions at our initial meeting and try to be sure to cover all bases before I submit my estimate.
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush." 

Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
When determining the total cost of a home exterior paint project, you'll want to include the cost of materials like paint, supplies and other items you might want to cover in addition to the siding. If you know the average cost of these items in addition to your home exterior project cost, you'll have a good plan in place when you start calling for professional estimates. This also gives you the option to purchase or paint some items yourself to save money. Here are some of those cost factors and what you might expect to pay:
For your convenience MDE publishes this list of accredited lead contractors that meet Maryland’s standards to perform abatement activities involving lead-based paint. The list is an information resource only. MDE does not endorse any of the contractors included on this list nor does MDE provide any warranty about their performance. Consumers are advised to request bids and conduct reference checks before hiring. Contact the individual contractors for information regarding services and fees. Verify with the contractor you are going to hire that the supervisor is accredited by MDE and all lead paint abatement workers have current training. This accreditation and training does not satisfy the EPA Renovation, Repair and Painting (RRP) Rule.
Complete the EPA’s Renovation, Repair and Painting (RRP) program. As of 2010, all painting contractors in the United States must be officially certified to work with lead-based paints. The purpose of the RRP program is to inform new contractors about the risks and proper safety procedures for working on properties that contain hazardous materials.[2]
Based in the United Kingdom, Ian Linton has been a professional writer since 1990. His articles on marketing, technology and distance running have appeared in magazines such as “Marketing” and “Runner's World.” Linton has also authored more than 20 published books and is a copywriter for global companies. He holds a Bachelor of Arts in history and economics from Bristol University.
Want to know the color you pick will be good in your room? With this tool you can put it on some "walls" before you even paint. Here you can do it with Glidden's room visualizer tool linked below.  Either pick from our selections of rooms or upload your own and you can change walls and trim to find your perfect color. {^widget|(name)CtaButton|(Label)Paint+Your+Room+Online|(Url)https%3a%2f%2fwww.visualizecolor.com%2fglidden%23%2f|(ButtonID)Paint+Your+Room+Online|(Target)_blank|(Color)d6414d|(Edge)btn-rect|(GtmT)cta|(widget_displayname)CTA+Button^}
Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.
When you go to the home improvement store, find out how much 12 gallons of the paint you want would cost, and that will help you determine your cost. Maybe it's a low-quality paint that costs $30, in which case you're looking at about $360 for paint. If you choose high-quality paint that costs around $70, your total paint cost could be closer to $840. Professionals also recommend that you add an extra 10 or 20 percent to your total square footage, depending on the type of siding you have. Some textures require extra paint because they're rough. This is especially true with wood and stucco siding.
Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
I'm hiring an interior painter and that is why I was reading this comment list. I'm concerned about your comment about Angie's List. Some of us don't have personal recommendations for tradespersons, and rely on sites like this. Are you saying that Angie's List's reviews are not complete or that they do not print some of the negative reviews? It's hard to know what to do - I have not been able to find a person who just had their paint done so I can ask him/her about the quality of the painter.
Tru Colors Contracting is an experienced residential paint contractor that has been serving Miami, Broward and Palm Beach Counties for many years. We are completely dedicated to providing our residential customers with high-quality interior and exterior painting services that yield beautiful and long-lasting results. Painting is one of the easiest ways you can enhance the look of your home and that's what we will do for you with our services. We can paint the inside and outside of your home, including any structure or surface that is looking dull or worn and needs a new look.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
When their bids are successful, contractors meet customers to finalize their requirements and plan the order and timing of work. Contractors estimate the time required for surface preparation, painting several coats and drying time between coats. For interior painting jobs, they might have to allow time for clearing rooms. Exterior painting schedules might be dependent on the weather in different parts of the country. Exterior painting is not practical in very wet or very cold conditions.
×