This painter Scot never came and finished the job. Texted me at 6:30 in the morning saying that he isn't able to do the job I gave him. I would not recommend this painter to anyone. I will make sure everyone I know won't use this guy. He is the worse business owner I have ever met. I don't know how he is in business. Be very careful of this guy Scot. Don't trust him and don't pay him for anything for any work.
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)

Customer Service/Scheduling: I ended up being admitted to the hospital about a week or so after we decided to go with Excel, with pregnancy related complications. When they reached out to me as a reminder for the deposit, I explained my situation, and asked for a little more time to see if we could even proceed. Without hesitation, they said this was not an issue. This company cares about the people they are working with, not filling up every single day with a job. We also went back and forth. At first we cancelled, and then we asked for the dates back, and they were so accommodating.
Because of our wet/cold weather, another painter was booked out through August as of May 7th, 2016.  Anyone even thinking about a VA loan refi should get estimates for painting and pest inspections BEFORE starting on the loan paperwork, otherwise you will have difficulty getting painting and inspections done in a timely manner (and it is my understanding this is common with VA loans.)  
Paint gets more expensive as you go from flat to gloss. The difference is usually around $1 per gallon per sheen upgrade. Flat is the cheapest, then matte flat or eggshell, satin, semigloss then gloss. Paint also gets much more expensive the darker it gets. A white or neutral paint color can be as much as $20 less expensive than a deep base red or blue.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
I agree with you Richard, as a painting contractor for very many years, people are always looking to get more and more out of you. I had to give an estimate to a lady a few weeks ago who had more stuff around her home than a thrift store including heavy furniture, stuff all over the floor and junk everywhere. I knew if I accepted the job id be a furniture mover and cleaner. I also agree this article makes it seem like the contractor is out to rip off the customers. Fact is I always leave doing more work than agreed upon. It doesn't bother me since the customer is always satisfied. Just saying
There are numerous factors to consider prior to pricing that can add additional costs to the painting of your home. It was previously stated that the surface material, condition of existing surface, home features, special materials that may need to be utilized, and any additional prep work that might be required can effect the final cost. The location also effect the overall condition of the home or business moving from the Northwoods , lake areas to urban homes.
I turn away any job when the client refuses to pay anything up front. It sends a red flag. I also charge a scheduling fee which is non-refundable. I get 33 percent when I show up and begin work. Another percentage halfway through, and the balance upon completion after client is satisfied. There needs to be skin in the game for both parties as a measure of good faith. If you are dealing with a reputable company (did your due diligence, right?) why wouldn't you want to pay something as work progresses? We do this not only because we love to paint but we require cash flow to stay in business. There is not always 'money in the bank' as you suggest. It's tough these days. The suggestion buy 'Kim' 'Never pay a contractor a deposit' is nonsensical.

In my opinion the information on this page should be modified as for the pricing for my area is not correct and the information here could damage the expectations of my or another painting companies pricing. There are too many situations that there is not a way to specify cost prior to seeing the actual house and that information needs to be in big print on this page.


Research the licensing requirements for your area. These laws governing professional contractor work will be different depending on where you live. It’s important to be aware of these laws and what they mean from the outset. Contact the licensing board for your state or district to find out more about what you’ll need to do to get your business off the ground.
Using an airless sprayer to place paint on the wall (using low pressure) will speed up the process because your not having to dip your brush or roller. spray about 3 or 4 sq. ft. and then back brush or roll spreading and evening the paint. Because your using low pressure, mask and cover is at a minimum once you are accustomed to handling the spray gun and the type of surface being painted. Overspray will be larger droplets they tend to fall, than float around.
Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.[20]
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
Vinyl siding is one of the more inexpensive siding materials to have repainted, especially with recent innovations in painting materials. Homeowners will first need to vinyl cleaned and repaired, and any clapboards or vinyl sections that have blown off because of climate conditions will need to be replaced. Painting professionals will apply paint quickly and easily over the vinyl siding, much like an interior paint job. The finish, however, may require extensive work and regular maintenance. Expect to pay between $600 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), with prices likely increasing for the finish. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather conditions.
We paint all types of projects — interior and exterior residential, commercial, public, and industrial buildings. Our expert painters are dedicated to providing our clients with prompt, professional, quality work. For over 30 years, we have provided friendly service at affordable rates. Our goal at House Painting Inc. is to instill confidence in our ability to meet all your expectations so that you know you are always our number one focus.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
Customer Service/Scheduling: I ended up being admitted to the hospital about a week or so after we decided to go with Excel, with pregnancy related complications. When they reached out to me as a reminder for the deposit, I explained my situation, and asked for a little more time to see if we could even proceed. Without hesitation, they said this was not an issue. This company cares about the people they are working with, not filling up every single day with a job. We also went back and forth. At first we cancelled, and then we asked for the dates back, and they were so accommodating.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.
Painters often tint primer close to the color of the top coat, but Wallis thinks that's a recipe for "holidays," or missed spots. Instead, he tints his primer a contrasting color. "If I can see the color coming through, I know I need to apply more paint," he says. On the cottage shown in this story, he chose a gray-blue primer to go under a peach top coat.

If you're going to do any part of the painting or prep work on your own, you must know that the first step in preparing a surface is washing it. Since dirt can affect the smoothness of a surface area -- and therefore paint's adhesion to it -- use soap to remove any dirt or stains. Make sure there's no soap left on the walls when you're finished; also make sure to remove any gloss with sandpaper and vacuum up the leftover dust.


Every home has details that can be accentuated for amazing looking visual appeal and first impressions.  The key is to not make the wrong details stand out.  Entryways, windows, shutters and other details on the home can be painted to make their design noticeable.  However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results.
A qualified exterior house painter can walk you through the process of getting your house ready for a new coat of paint, from scraping and sanding to patching and priming. A pro can also recommend the best exterior paint for the job, whether your siding is wood, fiber cement, stucco, vinyl, or even metal. When it comes to getting the work done, your painter will arrive with all the tools and equipment needed to get the job done quickly, correctly and safely.
There are numerous factors to consider prior to pricing that can add additional costs to the painting of your home. It was previously stated that the surface material, condition of existing surface, home features, special materials that may need to be utilized, and any additional prep work that might be required can effect the final cost. The location also effect the overall condition of the home or business moving from the Northwoods , lake areas to urban homes.
Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.
Every home has details that can be accentuated for amazing looking visual appeal and first impressions.  The key is to not make the wrong details stand out.  Entryways, windows, shutters and other details on the home can be painted to make their design noticeable.  However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results.
Complete the EPA’s Renovation, Repair and Painting (RRP) program. As of 2010, all painting contractors in the United States must be officially certified to work with lead-based paints. The purpose of the RRP program is to inform new contractors about the risks and proper safety procedures for working on properties that contain hazardous materials.[2]
×