If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting. 

When their bids are successful, contractors meet customers to finalize their requirements and plan the order and timing of work. Contractors estimate the time required for surface preparation, painting several coats and drying time between coats. For interior painting jobs, they might have to allow time for clearing rooms. Exterior painting schedules might be dependent on the weather in different parts of the country. Exterior painting is not practical in very wet or very cold conditions.
Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.[20]
Most pros don't bother cleaning brushes and rollers if they are going to use them the next day on the same job. "Latex paint dries slowly in cold temperatures," says Maceyunas. For two-day jobs, he wraps the rollers and brushes in plastic grocery bags and sticks them in the refrigerator. "Just allow the roller to return to room temperature before reusing it," he says. Roller covers are almost impossible to clean thoroughly. Most pros buy new covers for each job.
Over time, even the best paint job needs a new coat. Old paint peels and fades and those colors that were all the rage ten years ago can start to look a bit dated. With your busy schedule, you've got no time to pick up a paintbrush, and you've just remembered that your in-laws are in town for dinner next week! We hear stories like this all the time, and our reply is always the same: don't panic! Book a painting professional through the Handy platform. Wall painting shouldn’t be stressful and when you use the Handy platform, it won’t be.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
Hmmm...Intro to E12...looks suspiciously like a freehand angled cut on that contractor saw... Yes, the riving knife might save you from a dangerous kickback...but still a very bad idea.. Why not a 'safety segment' explaining kickback and why you should not do this (styrofoam demo, back side of the blade teeth rising up grabbing the foam and throwing it back at you...)

EPA's Lead Renovation, Repair and Painting Rule (RRP Rule) requires that firms performing renovation, repair, and painting projects that disturb lead-based paint in homes, child care facilities and pre-schools built before 1978 have their firm certified by EPA (or an EPA authorized state), use certified renovators who are trained by EPA-approved training providers and follow lead-safe work practices.


Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
Estimate: Short and sweet, but HIGHLY accurate. We wanted to use our own paint as there was a particular no VOC kind I wanted to use, and this was never an issue for them. They knew exactly how much we needed for the job based on the specs from the website of the company we were ordering it from, so we could order it without issue. The estimate was right inline with two other companies we received quotes from.
If you decide to hire help, have several contractors inspect the job and provide proposals. You'll probably find huge price differences for the same job. A Checkbook undercover shopper got quotes from nine Washington-area contractors to repaint the walls, ceiling and trim for a living room, dining room, family room, bathroom and kitchen. Including paint and supplies, prices ranged from $2,650 or less to more than $6,500.

Day-to-day tasks can consume too much time when there is little or no automation. Countless cloud-based productivity tools are available to streamline and automate your tasks. These tools can usually be put into place with little disruption to your current practices. Ultimately, integrating new automation tools will increase productivity and help you make the most […]

Specialty painting by the hour costs between $40 to $50 on average. Paint might range between $75 to $90, costing an additional $40 to $50 per hour. The painter's skill and experience are also determining factors in the cost of specialty painting. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some painters might also charge $60 or more for a consultation. Trompe l'oeils, in particular, will run on the expensive end of the price spectrum. Return to Top 

The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture. 

"I had called the last minute for an interior painter, because I had flown into town for just 5 days, to get my home painted. PPP Paint Services made time for me. Made an appointment on a Monday and they were there by Thursday and done by Friday. 9 rooms including trim work. The job came out great, and at a great value. I would highly recommend this company."

Painting techniques like striping, color blocking, stencils, and accent walls are also an option for using color to visually expand a small home. Large horizontal stripes can widen or elongate a room and look especially pretty using colors that are similar. Bold and contrasting colors are daring for a small space, while an accent wall allows you to showcase one special area of the room. Try something new in your smaller home and prepare to be wowed by the pop that the right color can provide.
If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
A number of factors help determine when you should paint your home’s exterior. These include your local climate and weather conditions, the age of your home, and the type of siding used. A high-quality finish in ideal conditions could last 10 years. But if your home takes a beating from the elements, you may need to repaint as often as every three years. Most homes can be on a 5-8 year interval. If you’re not sure if your house is due for a refresher, watch out for signs of deteriorating paint, such as fading and chipping.

Paint Contractor

×