O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
If you are unsure about what colors will work best in a space, you may wish to hire an interior decorator to help. Decorators can look at your furnishings, the size and shape of a room, and the amount of light it gets to help you determine the best shades for the space. Design services cost around $50 to $200 an hour, and can help you find the perfect colors for your home.
Want to know the color you pick will be good in your room? With this tool you can put it on some "walls" before you even paint. Here you can do it with Glidden's room visualizer tool linked below.  Either pick from our selections of rooms or upload your own and you can change walls and trim to find your perfect color. {^widget|(name)CtaButton|(Label)Paint+Your+Room+Online|(Url)https%3a%2f%2fwww.visualizecolor.com%2fglidden%23%2f|(ButtonID)Paint+Your+Room+Online|(Target)_blank|(Color)d6414d|(Edge)btn-rect|(GtmT)cta|(widget_displayname)CTA+Button^}

If you do decide to make it a full-time business, the sky’s the limit. The house flipper/contractor that I worked for billed clients $35 per hour for painting, and paid his best painters perhaps half of that, so there is room for some profit there. Consider the case of Matt Shoup, who started with $100 and went door-to-door, asking neighbors if they needed some painting done, then built a painting business that earns $2.5 million per year!
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.
This painter Scot never came and finished the job. Texted me at 6:30 in the morning saying that he isn't able to do the job I gave him. I would not recommend this painter to anyone. I will make sure everyone I know won't use this guy. He is the worse business owner I have ever met. I don't know how he is in business. Be very careful of this guy Scot. Don't trust him and don't pay him for anything for any work.
Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.

Thanks, all, for your time & efforts adding to the article & comments, especially Dave urging requesting both General Liability AND Worker Compensation insurance certificates to protect from real & fraudulent liability--from my experience especially in California, where insurance fraud is a popular income thief, even causing car collisions to collect.


Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.[20]
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.

Paint Contractor Company

×