When we checked out their work the next day we found multiple, I mean MULTIPLE, paint splatters all over the place. On the hardwood floors (had to be at least 10 paint splatters on the ground), paint on the fireplace, clumps of paint on the wall. There were several areas that needed a paint touch up that weren't. It seemed like the whole job was done by a kid. We called them and asked if they could come back and basically finish their job. We told them we will mark all the paint splatters and areas missed with blue paint tape, so when they came back they would know exactly where to look. We marked probably about 20 areas that needed attention. Sounds flawless right?
Brighten up your home. From DIY lighting that adds both value and light to your house, to unique painting ideas that go beyond picking out paint swatches, our real-life homeowner stories and expert advice can illuminate every room. What house painting tips can make the job go quicker with fewer mistakes? Which lighting ideas can create just the right ambiance?
Consider purchasing supplies personally to save money. Ask the painter for a bid that separates labor and materials. Then explain that you'll purchase the materials and ask for a list of exactly what will be needed to complete the job. Caulking, for example, is an extra supply commonly used to fill any cracks or damaged areas in your walls -- and one that might be overlooked in an incomplete list.
As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
In 1894, a national association formed, recreating itself in 1918 as the National Federation of Master Painters and Decorators of England and Wales, then changing its name once again to the British Decorators Association before merging, in 2002, with the Painting & Decorating Federation to form the Painting & Decorating Association. The Construction Industry Joint Council, a body formed of both unions and business organizations, today has responsibility for the setting of pay levels.
I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
In England, little is known of the trade and its structures before the late 13th century, at which paint guilds began to form, amongst them the Painters Company and the Stainers Company. These two guilds eventually merged with the consent of the Lord Mayor of the City of London in 1502, forming the Worshipful Company of Painter-Stainers. The guild standardised the craft and acted as a protector of the trade secrets. In 1599, the guild asked Parliament for protection, which was eventually granted in a bill of 1606, which granted the trade protection from outside competition such as plasterers.
Estimates are one of the most important tools to help you land the next job. During our most recent webinar series on estimating, Fred Yarur of PEP (Painter’s Estimating Program) outlined 10 foundational principles to support effective estimating procedures. Use estimate tools. These enhance your ability to make informed decisions. Estimating is the process of […]
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the ﬁrst coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
If you do decide to make it a full-time business, the sky’s the limit. The house flipper/contractor that I worked for billed clients $35 per hour for painting, and paid his best painters perhaps half of that, so there is room for some profit there. Consider the case of Matt Shoup, who started with $100 and went door-to-door, asking neighbors if they needed some painting done, then built a painting business that earns $2.5 million per year!
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
Day-to-day tasks can consume too much time when there is little or no automation. Countless cloud-based productivity tools are available to streamline and automate your tasks. These tools can usually be put into place with little disruption to your current practices. Ultimately, integrating new automation tools will increase productivity and help you make the most […]
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.
Beginning with the prep work and ending with last coat of paint or the finishing, an exterior paint job will last anywhere from one to two weeks. After completion, homeowners using low-quality paint will need to repaint every four or five years to keep it well maintained; homeowners using high-quality paint can go longer without a new coat -- usually about seven or eight years, depending on the type of paint and material.
To solidify this response, we have been in business for over 30 years as a painting contractor. We didn't just paint a couple of houses 25 or 30 years ago, we paint approximately 900-1000 painting jobs per year and operate with 40 professional painters doing commercial, residential and industrial painting. This article on behalf of Angie's List is totally asinine! I was under the impression Angie's List was only carrying "legitimate" contractors with established reputations. This article written is primarily referring to bottom feeding, one man band operations, trying to hustle for a paycheck.
Load flat or eggshell exterior paint color into paint sprayer. Depending on intensity of hue, apply one or two coats of flat or eggshell exterior paint to entire house. Be sure to work your way from top to bottom in a smooth, controlled manner, overlapping each stroke by 8 inches. TIP: When changing exterior color from light to dark or dark to light, start with a coat of primer to ensure proper coverage. Primer is not necessary when a fresh coat of existing color is being applied.
A number of factors help determine when you should paint your home’s exterior. These include your local climate and weather conditions, the age of your home, and the type of siding used. A high-quality finish in ideal conditions could last 10 years. But if your home takes a beating from the elements, you may need to repaint as often as every three years. Most homes can be on a 5-8 year interval. If you’re not sure if your house is due for a refresher, watch out for signs of deteriorating paint, such as fading and chipping.