There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed.  Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home.  Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.

To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint. 

This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.
Professional painters provide estimates primarily based on the square footage of your home. Painting an average home between 500 and 1,500 square feet can cost between $1,000 and $3,000. However, factors such as number of stories and ease of access can also affect the overall price. Homeowners report that the average cost to paint a house nationally is $2,581 and most pay between $1,714 and $3,682.
If you're going to do any part of the painting or prep work on your own, you must know that the first step in preparing a surface is washing it. Since dirt can affect the smoothness of a surface area -- and therefore paint's adhesion to it -- use soap to remove any dirt or stains. Make sure there's no soap left on the walls when you're finished; also make sure to remove any gloss with sandpaper and vacuum up the leftover dust.
Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.

Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.


I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.
This all comes down to the rules.....1. references....does the contractor have them??? I ALWAYS furnish all my prospective customers them....no excuses...2. insurance....again, I always furnish proof....3. Read the proposal carefully...I ALWAYS list materials down to tape used, the brand, the grit of sandpaper, the manufacturer, etc....its INEXCUSABLE to not list all of these items....I am a member of the PDCA, the Painting and Decorating Contractors of America, the foremost authority in the coatings industry and they also approve of what I listed....if you do not follow these guidelines, you will NOT get a job reflective of "professional". Look for the PDCA where any painting contractors are, if they are not a member, RUN!
Even if you go it alone, specialize to keep your initial investment low. If you do only interior painting, for example, you might get by with one ladder, a few brushes, rollers, basic hand tools and such, for an investment of less than $300. Again, you can add to your tools as you need to (every job is a bit different), and parlay profits into the equipment necessary for exterior painting or working on large commercial properties.
We were performing some remodeling in conjunction with the painting project and Henry's crew was able to work with and around our contractor with ease.  Henry's crew was ahead of schedule, so they were able to start our project early (nearly a week ahead of schedule) and ended up finishing the project the day they were originally scheduled to start!  
additionalType URL  An additional type for the item, typically used for adding more specific types from external vocabularies in microdata syntax. This is a relationship between something and a class that the thing is in. In RDFa syntax, it is better to use the native RDFa syntax - the 'typeof' attribute - for multiple types. Schema.org tools may have only weaker understanding of extra types, in particular those defined externally.
We were performing some remodeling in conjunction with the painting project and Henry's crew was able to work with and around our contractor with ease.  Henry's crew was ahead of schedule, so they were able to start our project early (nearly a week ahead of schedule) and ended up finishing the project the day they were originally scheduled to start!  
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says. 
×