Complete the EPA’s Renovation, Repair and Painting (RRP) program. As of 2010, all painting contractors in the United States must be officially certified to work with lead-based paints. The purpose of the RRP program is to inform new contractors about the risks and proper safety procedures for working on properties that contain hazardous materials.[2]


There are numerous factors to consider prior to pricing that can add additional costs to the painting of your home. It was previously stated that the surface material, condition of existing surface, home features, special materials that may need to be utilized, and any additional prep work that might be required can effect the final cost. The location also effect the overall condition of the home or business moving from the Northwoods , lake areas to urban homes.

I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.

My wife and I just painted the interior of our house with about 6-8 gallons, of $30+ per gallon (meaning the good stuff, non-diluted) with absolutely fantastic results. However we just paid an average of $5 per gallon. Reason...all big box stores have paint, set aside, that has been mixed but not picked up by the customer. They need to sell it quick and if you're not in a hurry (you know well in advance that a room or two need painting and it's not like the roof leaking and needs an immediate fix) you can go to each store when you need other supplies or food, like Walmart (when convenient, driving 20 miles to each is not worth it) and over the course of a month or two, pick out some very nice colors of quality paint. We found perfect colors...not saying they were our first choice but when we opened the can, very nice and some even better than our original picks. Cost to paint the entire house was about $100, with all materials included, period. We had it on the market for a few months to sell, didn't sell, painted the rooms, got 2 offers the day after we finished, took the best one and never looked back.

Home Painter Company


Even an old lamp with a bare bulb held close to a wall will make minor cracks, bumps or nail pops jump out. Carmen Toto, owner of C. Toto & Sons in Madison, New Jersey, uses painter's putty or a lightweight spackle for minor cracks and dents; he uses plaster of Paris for dents deeper than 1/8 inch. Instead of the standard tape-and-spackle method for bridging over recurring stress cracks, Maceyunas uses a rubberized spray-on primer called Good-Bye Crack. Damaged wood requires a slightly different approach. "Don't use spackle on wood," says Toto, "because it just won't stick." For damaged trim, he uses painter's putty or a two-part wood filler, such as Minwax's High Performance Filler. Smooth any repairs, bumps, and nibs with a drywall pole sander. For smoother walls and better adhesion, some of our pros sand all previously painted walls regardless of the shape they're in.
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
Estimate: Short and sweet, but HIGHLY accurate. We wanted to use our own paint as there was a particular no VOC kind I wanted to use, and this was never an issue for them. They knew exactly how much we needed for the job based on the specs from the website of the company we were ordering it from, so we could order it without issue. The estimate was right inline with two other companies we received quotes from.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
As a full service industrial & commercial painting contractor servicing the Los Angeles, Orange, San Diego and Riverside counties, our expertise in commercial & industrial painting is wide ranging and our commitment to safety, environmental and industry standards is second to none. Wilson & Hampton Painting Contractors can handle elaborate painting projects with finesse like Disney’s California Adventure Resort, Angel Stadium's 'Big A', the Los Angeles Grand Hotel, UCI Medical Center, and churches across the nation, as well as industrial and municipal painting projects like water towers, hospitals and schools.
You will want to use the highest quality exterior home paint your budget will allow for your project -- not only because it will look the nicest, but also because it will save you money in the long term by offering better coverage and durability. Better coverage means fewer coats and fewer work hours for your painter; better durability means that you won't have to spend money to paint the exterior of your home again in just a few years. How do you know how much paint you're paying for? Here's some helpful math:
You want to convert a wall to dry erase board, coat it in clear or change the color of the wall. If you want it to match your filing cabinets and cubicles we can coat your wall with metallic colors.No longer do you have to have a WHITE dry erase board. You can now have it clear or colors for any surface. You can coat any chalkboard with clear and turn it into a dry erase board. It is now your choice for your décor. See our dry erase painting video here.
We paint all types of projects — interior and exterior residential, commercial, public, and industrial buildings. Our expert painters are dedicated to providing our clients with prompt, professional, quality work. For over 30 years, we have provided friendly service at affordable rates. Our goal at House Painting Inc. is to instill confidence in our ability to meet all your expectations so that you know you are always our number one focus.
Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.

We paint all types of projects — interior and exterior residential, commercial, public, and industrial buildings. Our expert painters are dedicated to providing our clients with prompt, professional, quality work. For over 30 years, we have provided friendly service at affordable rates. Our goal at House Painting Inc. is to instill confidence in our ability to meet all your expectations so that you know you are always our number one focus.

The last big decision is how to apply the paint. Most pros use paint sprayers because they're fast, but in inexperienced hands a high-powered sprayer can leave drips, thin coats, and a mist that may land on many things other than your siding. If you do hire a painter who uses a sprayer, make sure he is meticulous about removing, covering, or masking off everything in the area that might get hit with overspray: gutters, roofs, windows, shrubbery, walkways, cars—you name it.

Spills and spatters happen, regardless of how careful you are. It’s a lot easier to pre- pare for them than to wipe them out of your carpeting or off your wood floor later. All it takes is canvas drop cloths in your work area (a 4-ft. x 15-ft. cloth costs $15). The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard floors, so rosin paper ($10 for 400 sq. ft. at home centers) is better over vinyl, tile and hard- wood. Tape the sheets together and to the floor to provide a nonslip surface.
WOW! I think the guy I hired read this first and I have photos that would make your skin crawl. Bottom line: he got me for $1900.00. Every single thing he painted had to be completely redone....that's when I discovered he did NOT use the colors I picked, he actually used leftover exterior paint from his mother's house! Because I have pets he said things needed to be sealed first and I did agree to that. What I did NOT agree to was using some kind of foul smelling gray stuff ON MY HARDWOOD FLOORS! THEN he painted them BLACK, telling me that all they were good for was covering over with laminate or carpet. He also dripped and tracked paint all over my ceramic tile floors. PLUS left a wet used paint roller in my garden window and had stuff piled in front so I didn't find it until it had dried. I have no idea how much that is going to cost to repair. Then he left without finishing (thank God) but left the "leftover" paint, uncovered, in the rain. Again, hid it so I didn't immediately find it. Obviously we will be going to court but I doubt if I see a penny from him.
Painting services from experienced contractors can take the hassle out of a lengthy project and ensure that the proper paints are used. Additionally, experienced painters can achieve straight lines for a crisp, clean look. Costs for painting services vary depending on the location of the home, its size, and a variety of other factors. Hiring a contractor for painting services can increase the appeal and value of the home.
Comment: Freshening up a well kept home for sale: paint stairwell and one bathroom, paint and possibly repair exterior front door surround, paint front door, remove, paint and replace palladian window on second floor (easy to access), paint baseboards and woodwork where needed, possibly paint (same color) small kitchen walls, paint inside and out of sun room windows, as needed.
Contractors apply several layers of paint to achieve a suitable finish. They leave the first coat to dry for the recommended time and apply one or more finishing coats. They might choose paints with special qualities for different types of room. Manufacturers have developed paints for bathrooms or kitchens that have good resistance to moisture for example. When they have completed painting, they clear away any equipment and restore the area to its original condition.

The best time to tackle windows is in the beginning of the day, when you're fresh," says Doherty. "But it still takes me an hour to do a standard window." For double-hungs, begin by raising the inner sash and lowering the outer sash until their positions are almost reversed. Paint the lower half of the outer sash first, then the entire inner sash. Once the lower sash is dry, return both to their normal position, but leave them slightly open. Finish painting the outer sash. "Windows take too long to tape," says Doherty. When painting, overlap the glass by 1/16 inch to seal the wood.


to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.

Work with a professional painting contractor. If you haven’t done so already, sign on to work with a painting company near you. As part of a professional team, you’ll learn the tricks of the trade and work in a variety of different environments, both commercial and residential. There’s no better way to accumulate practical experience than to do it on the job.[8]
After any areas repaired in the previous step are primed, we apply premium quality paints for a uniform finish. There are multiple finish options, including flat, matte, eggshell, satin, semi-gloss, and high-gloss, and we will have gone over the benefits of each with you beforehand so you can make an informed decision. The time will vary depending on the size of the job, but we will always ensure to work as quickly and efficiently as possible.
"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
So why not just paint your own home. I'm not a painter, so my wife and I take our time, buying the paint and supplies, and doing our own painting. Yes, we need to tape, and it's not perfect, but we get the satisfaction of seeing our completed work. Get the supplies, sliders for your furniture, and patience and go for it. That way YOU have control over the entire project. 

CertaPro Painters® provides a range of custom interior and exterior painting services, allowing for a smooth, seamless experience and exceptional results in every home. Whether you’re having your two-story foyer updated or refreshing the paint in your home’s bedrooms, the CertaPro Painters® team approaches every painting project with an eye for detail.
Located at the northern part of the state, Jacksonville is right along the Atlantic Ocean. In addition to year-round residents, many homeowners have homes in the area that they rent out to vacationers and tourists. This is especially true in suburbs, such as Neptune Beach, Sawgrass, and Atlantic Beach, that are located right along the water. Keeping rental properties in good condition and ensuring they have fresh paint guarantees that they are attractive to potential visitors. Using bright, beachy colors and quality paints that can stand up to the salty air can increase the overall cost of painting services in the area.
the price can always be adjusted based on on or off season, amount of colors to be used. A job like this can be done in 2 days and much quicker with a helper. I charge a bit more than others just because its quality work done professionally. Theres others that charge more than this just because they can on the on season and most people dont get a 2nd bid...

First off all clients want a "deal" As a painting contractor for 38 years I can tell you that residential-commercial-industrial clients (and their needs are all diffrent. It seems this discussion mostly concerns residential repaints,so here goes--first off ALWAYS get a personal referance from a friend or co-worker. Always get an itemized contract that specifies the prep,color, number of coats, and specifics on payment. Remember you want to set up a relationship with the painting contractor of your choice. Bond, license and insurance are required to get a contractors license and are readily available online at your state Labor and Industries website. Second-- find someone you trust. He or his crew will probably be left alone in your home for most of the time. I always tell my clients that I wont bring someone to their home I wouldnt have in mine. Third--$$ Dont ever pay up front always insist on progress draws if the project is 2 or 3 phases remember If a contractor wants $3000 to do the job and you give him half up front he will be working for $1500. It WILL affect the quality of the product. In 38 years of business I have never taken a deposit and have never not been paid in full remember do what you said you would do for exactly what you said it would cost and there will be no problems with getting paid. one last reminder to clients you are also being evaluated when you interview a contractor. He is sizing you up as well. If he thinks you are a bit sketchy the the price will go up or he wont take the job at all. I have turned down some jobs that looked very profitable on the surface that turned out not to be so.(word gets around fast in the small painting community) Good Luck to clients and contractors
Ryan, David  and Erin were so  helpful during the entire process. The team was easy to work with, detail oriented and efficient. Because of this the entire project went smoothly, from the in person consultation, scheduling and throughout painting process. Hector and his crew did a wonderful job. They came in on time, asked questions when they needed to, polite, hardworking and most importantly excellent at their jobs.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
The PENNY HOARDER℠, ℠, and  ℠ are service marks of Taylor Media Corp. Other marks contained on this website are the property of their respective owners. Taylor Media Corp. is not licensed by or affiliated with any third-party marks on its website and they do not endorse, authorize, or sponsor our content except as noted herein. Please read our Privacy Policy and Terms of Service.
When we checked out their work the next day we found multiple, I mean MULTIPLE, paint splatters all over the place.  On the hardwood floors (had to be at least 10 paint splatters on the ground), paint on the fireplace, clumps of paint on the wall.  There were several areas that needed a paint touch up that weren't.  It seemed like the whole job was done by a kid. We called them and asked if they could come back and basically finish their job.  We told them we will mark all the paint splatters and areas missed with blue paint tape, so when they came back they would know exactly where to look.  We marked probably about 20 areas that needed attention.  Sounds flawless right?
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.

I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
David was great. Super communicative and responsive about the schedule and what was happening. I was also having a few windows installed and they were super great about adjusting their effort to work around the window people. And Josh and Garcia - I can't say enough about those guys. Josh walked around with me on the first day, going over what was happening and making sure I understood the scope of work. Anytime anything came up, he chatted with me about to make sure I was in the loop. The job site was always tidy and the place was really clean when they left. They were both friendly, courteous, and professional. And I think my four month old puppy would have been happy to go home with Josh. That ungrateful little monkey! (The puppy, not Josh).

Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
Wilson & Hampton provides the premier system for coating metal surfaces. Electrostatic painting is an efficient process where you can upgrade and rejuvenate your entire office or factory area in your choice of finishes at a fraction of the re-placement cost. Cabinets, lockers, machinery, Bathroom Partitions and much more can be painted in-shop or on-site by drawing the paint directly to the metal surface to be painted and “wrapping” around it, leaving no drips, spatter, or over spray.
Even an old lamp with a bare bulb held close to a wall will make minor cracks, bumps or nail pops jump out. Carmen Toto, owner of C. Toto & Sons in Madison, New Jersey, uses painter's putty or a lightweight spackle for minor cracks and dents; he uses plaster of Paris for dents deeper than 1/8 inch. Instead of the standard tape-and-spackle method for bridging over recurring stress cracks, Maceyunas uses a rubberized spray-on primer called Good-Bye Crack. Damaged wood requires a slightly different approach. "Don't use spackle on wood," says Toto, "because it just won't stick." For damaged trim, he uses painter's putty or a two-part wood filler, such as Minwax's High Performance Filler. Smooth any repairs, bumps, and nibs with a drywall pole sander. For smoother walls and better adhesion, some of our pros sand all previously painted walls regardless of the shape they're in.
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.

Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
The cost to paint the exterior of your home will vary depending on the size of your home, the condition of your siding, type of paint used and other factors. The average cost for labor and supplies ranges between $1,800-$3,800 and it may cost $6,500 or more for a large, custom project. In addition, you may need to pay more if there is damage to your siding or other challenging aspects of your job.
×